4. Configuration instructions New GCAN-211, network port IP: 192.168.1.10, default WiFi IP: 192.168.1.11. Note: You must configure the converter using ...

3 Connection and use 3.1 CAN-Bus configuration Before using the GCAN-208 converter, users have to configure the parameter of the ...

1 Introduction 1.1 Overview The GCAN-208 converter has integrated two standard CAN-Bus interface, one fiber interface(Single mode, multi mode, SC, ...

4 Examples 4.1 Transparent conversion 1. Serial port→CAN GCAN-207 will send the serial data to CAN-Bus immediately if GCAN-207 receive ...

3 Configuration instructions 3.1 Ready to configure First, power on the converter, then using a thimble click reset button at ...

2 Installation 2.1 Connect to PC The converter can be connected directly to a PC using an USB to RS232 ...

1 Introduction 1.1 Overview The GCAN-207 converter has integrated one standard CAN-Bus interface, one Serial-Bus interface (RS232 or RS485). GCAN-207 ...

4. Relay function 4.1 Start 1. If ECAN Tools has been installed, users can directly run it on the desktop. ...

3. converter in use 3.1 Connect to USB When driver and software have been installed, connect the converter to the ...

2. Installation 2.1 Driver and software installation 2.1.1 Install driver and software ECAN Tools has been integrated hardware driver installation ...