How to use CAN-Bus data recorder for file saving?
4. File saving Note: GCAN-401 only supports a maximum capacity of 32G and the file system is FAT32 format of TF card, if your TF card is not the FAT32, the card must be reformatted into FAT32 format, data will be removed, please careful operation. TF card is full of files that are not automatically overwritten.If the time interval between frames is 1 ms,the data can be stored for 24 days(32GTFcard). GCAN-401 has integrated system ...
Introduction of CAN-Bus data recorder_GCAN
1. Introduction 1.1 Functional Overview GCAN-401 CAN-Bus data recorder is specially used for offline record CAN-Bus data. GCAN-401 has integrated one CAN-bus interface . Users can use TF card record bus data real-time. GCAN-401 adapter is suitable for historical data playback, error message analysis. 1.2 Properties at a Glance High speed 32-bit industrial-grade processor Use an external power supply (DC +9~30V，100mA) EMC ：contact ±2KV，air ±15KV EFT：±1KV SURGE：±1KV CAN-Bus connection via OPEH3, PHOENIX; Compliant with CAN ...
TCP format specification_GCAN
4. TCP format 4.1 CANopen slave→Ethernet（RPDO） 4.2 Ethernet→CANopen slave（TPDO） 5. Configuration instructions The GCAN-302 converter can be configured by using the"TCP-CANopen Config" software, including the basic parameters such as operating mode, working port, target port, target IP, CAN operating mode, CAN baud rate. 5.1 Connect the GCAN-302 converter to the computer Power on the converter, and connect the converter to the computer with a network cable. Open the "TCP-CANopen Config" software. Enter the IP address ...
The Connection of Ethernet-CANopen slave converter_GCAN
3. Connection and use 3.1 Configure with PC connections The GCAN-302 converter uses a 24V DC power supply. By using the "TCP-CANopen Config" software, the GCAN-302 converter can configure the working model and the parameter. GCAN-302 only supports communication between TCP to CANopen, other protocols are not supported. 3.1.1 Restore the factory settings GCAN-302 converter factory IP: 192.168.1.10. If users have changed the IP and forgot it, users can operate the DIP switch to reset ...
Introduction of Ethernet-CANopen slave converter_GCAN
1. Introduction 1.1 Overview The GCAN-302 is a CANopen slave and Ethernet converter. The CAN side of the GCAN-302 integrates the CANopen slave protocol. The GCAN-302 converts the CANopen slave protocol signal to the Ethernet signal or converts the Ethernet signal to the CANopen slave protocol signal. With this converter, devices using the CANopen master protocol can connect to Ethernet without changing the hardware architecture and extending the range of CAN bus applications. Note: CAN-302 ...
Réglage de l'ID du nœud et de la vitesse de transmission du bus CAN
3. Node ID and CAN-Bus baud rate setting GCAN - 301 can use "serial debugging assistant" to change the CAN bus node ID and baud rate. The instructions are shown in table 3.1, the baud rate index is shown in table 3.2. After entering the "serial debugging assistant", Serial port rate is set to 9600bps, parity bit is none, the data bit is 8, stop bit is 1. Please select hexadecimal when sending and receiving ...
Introduction of CANopen-RS485 converter_GCAN
1 Introduction 1.1 Overview GCAN-301(CANopen-RS485) has one standard CAN-Bus interface and one standard RS485 interface , it can realize the RS485 equipment as CANopen slave station access to CANopen network. It's a custom product. 1.2 Properties at a glance CAN-Bus interface adopts German CiA standard OPEN4 interface form The built-in CANopen protocol stack follows the protocol description document, DS 301 The CANopen node number is 32(customizable), which can be configured by software CAN-Bus baud rate ...
Use Of Customized CAN bus converter with CPCI port_GCAN
2. Converter used GCAN-212 can use computer software to configure the basic operation parameters, such as CAN bus baud rate, CANopen node ID, Ethernet IP address, gateway and so on. 2.1 GCAN-212 converter Ethernet working mode GCAN-212 converter Ethernet uses standard TCP Server working mode. In this mode, the GCAN-212 converter does not automatically connect with other equipment. It can communicate with the client after establishing the TCP connection. The process of establishing communication is ...
Introduction of Customized CAN bus converter with CPCI port
1. Introduction 1.1 Overview GCAN-212 is a customized converter with one or two CAN bus interfaces. The converter has integrated CPCI interface, so it can be used to IPC which communicate through CPCI bus. The GCAN-212 can customize multiple communication interfaces such as: Ethernet, Serial bus, USB, and so on. Users can use the customized converter into their own system and connect it to CAN bus. Note: The following chapter and parameters are all customized ...
WiFi connection_GCAN
5. WiFi connection 5.1 AP mode AP mode: GCAN-211 as a hotspot, receiving other WiFi device connection mode, like a wireless router. 5.2 Client(station) mode Client (station) mode: GCAN-211 as a client connected to the AP hotspot, the realization of wireless access network functions. 6. Technical specifications
French 
English 
Russian 
Spanish 
Korean